Open Open a memory file. (shortcut CTRL+O)
Save Save the currently loaded memory image to disk; uses the existing filename and does not ask for permission to overwrite. If no filename is currently assigned then the action is as for Save As. (shortcut CTRL+S)
Save as Save the currently loaded memory image to disk; asks for a name before saving; asks for permission to overwrite an existing file.
Print Produce a print of the memories on the default printer. (shortcut CTRL+P)
Print left side memories only Produce a print of the left side memories on the default printer.
Print right side memories only Produce a print of the right side memories on the default printer.
Save current grid as a TAB file Saves the currently active grid as a .TAB file. (shortcut CTRL+T)
Exit End the program
Memories Note: The Memories menu is also shown as a pop-up by right-clicking on the memories grid.
Undo Undo the last editing operation. (shortcut CTRL+Z)
Copy (and memories) Copy the selected cells to the Windows clipboard for pasting into another program, and also note the currently selected memories ready for a paste operation in the memories grid. When the paste operation is done, either in the memories grid or another program, the originally selected memories are left alone. (shortcut CTRL+C)
Cut memories Copy the selected cells to the Windows clipboard for pasting into another program, and also note the currently selected memories ready for a paste operation in the memories grid. If the paste operation is done in the memories grid the originally selected memories are made Empty. If the paste operation is done in another program the originally selected memories are left alone. (shortcut CTRL+X)
Paste memories Paste copies of the originally selected memories into the memories grid. (shortcut CTRL+V)
Copy Left side to Right Side Duplicates the left side to the right side
Copy Right side to Left side Duplicates the right side to the left side
Insert memory above Insert a new memory above the one selected. (shortcut CTRL+I)
Move selected memories Up The selected memories are moved up one position in the grid (shortcut F11)
Move selected memories Down The selected memories are moved down one position in the grid (shortcut F12)
Fill selection downwards Fills the top cells of a selected block downwards into the remainder of the selected cells (shortcut CTRL+D). Empty memories and memories containing broadcast frequencies are ignored.
Remove memory The selected memories are deleted and the subsequent memories moved up. (shortcut Shift+Del)
Delete memory The selected memories are made empty. (shortcut Del)
Compact empty memories All Empty memories are moved to the end of the grid.
Hide empty memories Toggle on/off the display of Empty memories. The setting is not preserved across program invocations. (shortcut CTRL+H)
Sort by frequency Sort the memories by frequency
Sort by name Sort the memories by name
List duplicate frequencies Display which frequencies are duplicated elsewhere.
List duplicate frequencies+tone Display which frequencies and tones are duplicated elsewhere (per side)
Find text Find a text string in the memories grid. Case is ignored. (shortcut CTRL+F)
Find next Find the next occurence of the Find text command. (Shortcut F3)
Delete PMS memory pair Deletes the selected PMS memory pair
COM port Detector Displays a screen to detect which port your programming cable is connected to.
COM Port Allows you to select COM1 to COM32
Log read/write to rig If ticked will produce a log of reads/writes to the radio in a message window. Only use if trying to diagnose problems with reading/writing to the radio. Do not scroll/move/resize the message window while reading/writing else you will probably induce a timeout or lose data.
Show Firmware V1.2 extra settings If ticked will add the new main unit V1.2 firmware radio settings to the Configuration and APRS/PKT tabs. Only do this if your radio has firmware that supports these settings. You can determine your radio's firmware version by powering the radio on while holding in the button on the left of the orange power button. The MAIN and PANEL firmware versions will be shown underneath VERSION.
Enable Autosize of column widths If ticked will reduce column widths to try and keep all items on the screen
Enable User chosen column widths If ticked will activate the user chosen memories column widths. Changing the width of a column is done by placing the mouse over a vertical dividing line between two columns in the headings row and looking for the cursor to change to a pair of arrows pointing east-west, then left-clicking and dragging to resize the column. See the Save size and position command below to save your chosen column widths.
Show menu rows in alternate shades If ticked shows rows in alternate shades
Show darker grid lines When ticked will show darker grid lines.
Font size of grids
Normal 10 point
Larger 11 point
Largest 12 point
Show a taller grid height Increase the row height of the grids. This will be helpful when using touch screens.
Define Repeater rules... Displays the Repeater Rules window to enable user-customised rules for automatic setting of repeater shift direction and amount. If repeater rules are active then a tick appears to the left of the command.
Select which memory columns to show... Displays a list of columns enabling you to select which ones are displayed
Select print options... Displays a list of columns enabling you to select which ones are printed, whether to print landscape or portrait, whether to print duplex (if your printer supports it), and to select from various top margin sizes.
Do not confirm before deleting memories If ticked will not ask 'are your sure..' questions when deleting/removing memories
Choose a folder for memory and .CSV files... Displays a folder browse dialog to permit choosing which folder to use for storing memory and .CSV files.
Default Import to .TPE files If ticked will set the default Import file type to .TPE instead of .CSV. Useful only if you import a lot of TravelPlus files.
Window position and Column Widths
Save size and position Save the size and position of the main window and the widths of the memories columns. If you have changed the width of any of the memories columns then you can keep these widths by clicking the command 'Enable User chosen column widths' on the Settings menu.
Force windows onto the primary desktop Forces all windows to appear on the desktop. If you have multiple monitors then the windows will appear on the screen that has co-ordinates 0,0 at the top left. This enables you to re-position windows that may have disappeared if the desktop configuration has changed. The keyboard shortcut for this command is Shift+Ctrl+F1
Contents Show the Help file (shortcut F1)
Check Download page for updates Starts your internet browser and directs it to the Download page of the G4HFQ website. Here you will find all of the programs available for download, together with the current version number and release date. If a more recent program is available you may then download and install it.
Repeater information on the G4HFQ website Directs your internet browser to http://www.g4hfq.co.uk/repeaters.html which contains information and links to sources of repeater data.
About FTB350J... Shows information about FTB350J