FTB350 - Details

Home Repeaters Download FAQ Order Links G2HCG articles FTBasicMMO FTBVR5K FTBVX3 FTBVX8 FTB1D FTB2D FTB60 FTB177/277 

FTB100D FTB250 FTB270 FTB350  FTB1050 FTB1802/1807/1907 FTB1900/2900 FTB2070  FTB2800 FTB7800 FTB7900 FTB8800 FTB8900 

There are now two versions of FTB350.   Buy Now
FTB350 is the version to use if you have a non-Japanese model FTM-350/350A
FTB350J is the version to use if you have a Japanese model FTM-350/A

The same license works with all versions - just buy the one
FTB350 license and download the versions you want to use.

Download the non-Japanese version FTB350 from here or this mirror site
Download the Japanese version FTB350J from here or this mirror site

You can view a web-based version of the FTB350 Help file or for FTB350J

See the Links page for sources of cables and the Help file for DIY information.

You can try the program for 2 weeks to check that it works on your equipment but you cannot write to the radio until it is registered.

  • Backup/restore of the FTM-350 clone memory
  • Modify memories
  • Add/delete/move memories
  • Cut/copy/paste memories
  • Sort memories by frequency or name
  • Analyse and report on duplicate frequencies
  • Edit PMS memories
  • Edit VFOs
  • Change the values in the radio's menus and APRS/GPS settings
  • Print memories

The Import/Export facility enables you to exchange memory information between the following radios by using .CSV format memory definition files. You will also need to use the appropriate FTBxxx software for the target radio.

  • FT-817, FT-847, FT-857, FT-897 (including ND and D models), FT-1802, FT-1807, FT-1900, FT-2800, FT-2900, FT-7800, FT-7900, FT-8800, FT-8900, FT1D, FT2D, FT-60, FT-250, FT-270, FTM-100D, FTM-350, VR-5000, VX-3, VX-8, VX-110, VX-150, VX-120, VX-170, VX-177,
  • VX-2, VX-5, VX-6, VX-7 - using the Commander range of software by Jim Mitchell, KC8UNJ

Memory definitions can also be imported from TravelPlus for Repeaters using .TPE files, and from ButelSoftware's ARC250.

The program runs on a standard PC that has an available COM port for connection to the transceiver and the COM port must be one with an FTDI USB chip It has been developed and tested on Windows XP, Windows Vista, Windows 7 and Windows 8. It will not run on Windows 8 RT version which does not support desktop applications. The minimum screen resolution is 800 x 600 but 1024 x 768 and above is recommended.

Questions or problems regarding this web site should be directed to me by email:  bob.freeth@g4hfq.co.uk
Copyright 1999 - 2015 G.R. Freeth. All rights reserved.